Commercial and industrial
Warehouses and distribution
A warehouse floor is a working surface and a safety system at the same time. It has to take point loads from racking and jacks, stay legible under line marking, and stop shedding dust onto everything stored on it.
What this floor has to handle
- Forklift and pallet jack traffic without delamination
- Joint treatment so wheels stop chipping the edges
- Line marking and safety zoning built into the coating
- Dust free surface, which matters most for anything stored open
- Phased installation so the operation keeps running
Typical system
High build epoxy or polyaspartic, specified to the traffic load
The final specification comes from the site visit. We take moisture readings, look at the drains and joints, and ask what actually gets spilled on the floor before anything is written down.
Request a specification
Not a ballpark. A written system, build thickness and return to service time.
(717) 454-5445Other commercial floors
- Commercial kitchensUrethane cement, the standard where hot washdown is daily
- Breweries and beverageUrethane cement at a build thickness matched to the thermal load
- Cannabis cultivation and processingSeamless epoxy or urethane systems over a fully prepared slab
- Auto shops and dealershipsPolyaspartic flake in the bays, higher gloss builds in the showroom
- Gyms and fitnessPolyaspartic flake, texture and build specified per zone
Send us the floor plan.
Or just the square footage and what happens on it. We will come and walk it.
$7 to $10 per square foot installed · 15 year written warranty